Some owners of Clio 5 and Captur II find that the built-in navigation Renault no longer works after an update EasyLink conducted by USB.
This problem mainly occurs during the passage from branch 1 to a version of branch 2. The rest of the multimedia system can work normally, but the integrated Renault navigation becomes unusable.
Why the navigation is blocked ?
The branch 1 and branch 2 of EasyLink does not handle the navigation in the exact same way. The software structure and the registration of the maps are different between these two generations.
When USB updates the system of branch 1 to branch 2, the multimedia system is properly updated, but the information related to the maps and navigation are not interpreted correctly.
Why is the camera disappears after 1 km/h ?
The transition from branch 1 to branch 2 can modify the behavior of the camera. In some cases, the image disappears as soon as the vehicle exceeds approximately 1 km/h.
This does not mean that the camera is defective. The system simply applies a different logic after migration to the branch 2.
- The camera will operate at very low speed.
- The image automatically disappears beyond about 1 km/h.
- The behavior is related to the software, not the hardware of the camera.
RexoMods has the solution
In many cases, RexoMods can restore the functionality of the built-in navigation Renault after a migration from branch 1 to branch 2.
The goal is to retain the advantages of a version EasyLink more recent, while finding a navigation Renault functional.
Pay attention to the version 283C38184R
The method of reprogramming to restore the navigation does not work on the version 283C38184R.
This version incorporates changes that prevent the use of the procedure will be applicable on some previous versions. Before any intervention, it is therefore essential to accurately check the version EasyLink installed.
And after the reprogramming ?
Once the reprogramming is done properly, it is possible to set EasyLink update to other more recent versions compatible without losing to the new navigation.
The problem is mainly concerned with the initial pass of the branch 1 to branch 2 via USB. Once the navigation has been restored, the following updates can be made more confidently.
- Built-in Navigation is restored.
- Possibility to upgrade to newer versions.
- Conservation of the advantages of a branch with the most recent.
- No automatic loss of the navigation after each update.
How to know if your vehicle is affected ?
The simplest is to identify the version EasyLink currently installed in the vehicle. This information is used to identify the branch of the system and the possibilities of correction.
- Turn on the ignition of the vehicle.
- Open the system information EasyLink.
- Note the version number that is displayed.
- Check if the system is in branch 1 and branch 2.
Conclusion
The blocking of the built-in navigation Renault after an update to USB from branch 1 to branch 2 has a different structure and software registration maps between the two branches.
The loss of the camera image beyond about 1 km/h may also appear after this migration. In many cases, RexoMods can suggest a solution to restore the navigation.